In this study, the performance of different aluminium hydroxide-based adsorbents was compared in terms of fluoride adsorption capacity, potential for repetitive regeneration, surface acidity and surface site concentrations. The adsorbents were aluminium hydro(oxide) (AO), activated alumina (AA), and pseudoboehmite (PB). The AO adsorbent was synthesised at different OH:Al ratios to optimise the fluoride adsorption capacity. The AO was pilot tested in a rural community in the Ethiopian Rift Valley where groundwaters are heavily enriched with fluoride. The maximum fluoride uptake was achieved for the AO adsorbent synthesised at OH:Al ratios between 2.5 and 2.7. The fluoride adsorption capacity of the adsorbents determined from mini-column studies was found to be 10.6, 1.9, and 2.4 mg/g for AO, AA, and PB, respectively. This significant difference in fluoride adsorption capacity is strongly related to the surface acidity and surface site concentration. The surface acidity (1.57 meq/g) and surface site concentration (0.74 meq/g) for AO is higher than that for AA and PB. The elemental composition analysis showed that AO has a lower % Al2O3 content than AA and PB, but higher sulphate (19.4%) and iron (2.2%) content. High resolution 27Al Magic Angle Spinning Nuclear Magnetic Resonance (27Al MAS NMR) spectra of AO, AA, and PB were recorded, to analyse the coordination geometry of solid Al species and the results showed that aluminium is coordinated octahedrally and tetrahedrally in all cases. Regeneration experiments showed that AA and PB can be regenerated for more than 3 cycles, whereas the potential for regeneration of AO for more than 3 cycles is limited. The results from a community defluoridation plant showed that fluoride in the feed water (8-10 mg/ℓ) is removed below 0.1 mg/ℓ. The average adsorption capacity was determined to be 2.11 mg/g based on continuous field monitoring results obtained until the fluoride content in the treated water exceeded the breakthrough value of 1.5 mg/ℓ. No major operational problems and complaints from the beneficiaries were experienced during operation.

Em câmaras de umidade controlada foi observada diferença na velocidade de absorção do BHC relacionada ao substrato borrifado. Embora não seja mais utilizado o BHC pelo Controle da Doença de Chagas no Brasil, estes dados podem ser relevantes para outros inseticidas usados em programas de controle.

In controlled humidity chambers in the laboratory differences in the absorption velocity of BHC were observed depending on the substrate sprayed. While BHC is no longer used in Chagas' disease control this data could have relevance to spraying houses in a controlprogramme with other insecticides.

A atividade residual dos vapores do inseticida BHC de vários materiais de construção em câmaras com controle de umidade, no laboratório, foram significativamente diferentes entre si. Ninfas do primeiro estágio de Dipetalogaster maximus, criados em laboratório, foram expostas a vapores de BHC liberados da superfície tratada dos materiais de construção trazidos de Mambaí, Goiás.

Residual insecticide activity of BHC vapors from various building materials in controlled humidity chambers in the laboratory were significantly different. Laboratory-reared, first instar nymphs of Dipetalogaster maximus were exposed to vapors of BHC which were being released from the treated surfaces of building materials taken from Mambaí, Goiás.

Young coffee plants (Coffea arabica L., var. Mundo Novo) were grown in nutrient solution purified from micronutrients contaminants by the method of MUNNS & JOHNSON (1960). All plants, except those in the control treatment, wer given all macronutrients and all micronutrients except one which was omitted in order to induce its shortage. Symptoms of deficiency were obtained for all known micronutrients but chlorine. Measurements, observations and chemical analysis of leaves allowed the following main conclusions to be drawn. 1. The relative influence of micronutrients in growth-measured by the fresh weight of the entire plant - was as follows: -Fe -Zn -Cu -Mo -Mn complete = -B = -CI. that is: the omission of iron from the nutrient solution caused the severest reduction in growth; lack of B and Cl had no effect. 2. Symptoms of deficiency of B, Fe, Mn, and Zn were found to be in good agreement with those in the literature. Effects of Cu and Mo shortage, however, had not been described so far: In the case of the Cu-deficient plants, the younger leaves were distorted, having an "S" shape, due probably to lack of growth of the veins; they lost their green color and developed rather large, necrotic patches near the margins. When molybdenum was omitted from the nutrient solution yellow spots develop near the margen of subterminal (fully mature) leaves; they became necrotic; there was a characteristic downward curling of the leaf blade along the mid rib so that the opposite edges touched each other underneath. 3. The levels of micronutrients found in normal and deficient leaves are given in Table 4. It is hoped that those values will serve as a basis of judgement of micronutrient contents found in leaves of field grown plants.